Technical Specifications

Classic Series

Top view of the Athabascan All Weather Pool model


Outside Dimensions: 85’’ x 69’’ | 217 x 174 cm | 7′ x 6′
Height: 39’’ | 98 cm | 3′
Heater(Watts): NA / Euro 4000 W
Water Capacity: 234 Gallons | 884 Liters
Dry Weight: 611 Lbs | 277 Kg
Wet Weight: 2560 Lbs | 1161 Kg

Electrical Requirements North America
(A = actual / B = breaker):

240 Volts / 6 Gauge Wire
1 Pump / A32amp / B40amp
2 Pumps / A40amp / B50amp
Upgraded Classic
240 Volts / 6 Gauge Wire
1 Pump / A40amp / B50amp
2 Pumps / A40amp / B50amp
115 Volts / 14 Gauge Wire
1 Pump / A12amp / B15amp

Equipment Location


arcticspas Equipment Location Mustang EcoPak
INYE Spa Pack
arcticspas Equipment Location Mustang INYE Spa Pack

Dimensioned Drawings

Dimensioned Drawings TIMBERWOLF
Dimensioned Drawings TIMBERWOLF

Recommended Site Access and Preparation


Most Spas Require 44” Clearance to get through gates, between houses and side fences and around corners. 9’-10’ of overhead clearance in order to move the spa into place.

To select a location for your new Arctic Spa with Forever Floor® will require a flat compact surface.

If you are using 4X4 railroad ties, they should be a maximum of 12-inch centers to properly support the entire underside of your spa.
Balconies and decks should be constructed to meet all builder codes and should be able to support up to exceed 100lbs/square foot. Remember that a gallon of water weighs roughly about 10 lbs

Your Spa can weigh as much a 1000lbs (454kg)